Proxim HRFUSB2 User Manual

Page of 65
42
Note:
Certain non-browser Internet applications, such as instant mes-
saging programs, will need to be manually reconfigured to com-
municate with the Internet over the LAN (Local Area Network).
By default, many of these programs are configured to use a Dial-
Up Networking connection which will prohibit a network modem
from operating in Multi-User Internet Sharing Mode.   
Once the Symphony Conductor has established a connection with the ISP, then 
all wireless computers will have a connection to the Internet.  There is a single 
telephone line and a single ISP account, but multiple computers will have 
simultaneous access to the Internet.  Each computer will be able to surf a dif-
ferent Web site at the same time.  However, while connected to the ISP, the 
network modem will be unavailable for any other use.
Note:
If a network computer connects to the Internet using Microsoft’s
Dial-Up Networking or an ISP-specific dialing program, then
the network modem will operate only in Single User Mode.  An
Internet connection must be established either manually from
the Symphony software interface or automatically, as configured
in the Maestro’s Dial On Demand screen, in order to use Multi-
User Internet Sharing Mode.
Single User Mode
Single User Mode allows only one wireless computer access to the shared 
modem at any point in time.  
Note:
Windows 2000 Professional computers cannot use the shared
modem in Single User Mode.
While one computer is using the modem in Single User Mode, no other com-
puter may access it.  
Single User Mode is used with any communication program not configured to 
operate over the LAN (Local Area Network), such as a bill paying program or 
fax software.  The modem will enter this mode whenever a computer attempts