National Datacomm Corporation 0650S02 User Manual
10 InstantWave High Speed
Access Point For Small Business
LED Indicators
The Access Point LEDs show the status of the connections. Figure 6
shows the
LEDs, and
Figure 6. Access Point LEDs
The Access Point LEDs show the status of the connections.
General
Color
Function
Power
Green
Unlighted: Power OFF
LED blinking: Diagnostic test
LED steady ON: Healthful condition
LED blinking: Diagnostic test
LED steady ON: Healthful condition
Status
Red
LED steady ON: sick condition
LED steady OFF: Normal working
LED steady OFF: Normal working
Radio
Color
Function
Active
Green
Indicates wireless data active
Link
Orange
Indicates a wireless link. If the radio
fails, this LED will be OFF.
fails, this LED will be OFF.
Ethernet
Color
Function
Active
Green
Indicates Ethernet data active
Link
Orange
Indicates a Ethernet link. If the
Ethernet fails, this LED will be OFF.
Ethernet fails, this LED will be OFF.
Figure 7. LED Functions
AP Management Software Installation / Uninstallation
Installation
step1. Insert the first InstantWave High Speed setup disk into drive A:
LNK
E/N
RF
E/N
PWR
LNK
TX/RX
RF
TX/RX