Davis Instruments DWW6357 User Manual
Maintenance
14
To clean the Tipping Spoon module, it must first be removed from the ISS base.
To remove this module from the base, follow these steps:
1. Unscrew the thumbsscrew securing the Tipping Spoon assembly to the ISS
To remove this module from the base, follow these steps:
1. Unscrew the thumbsscrew securing the Tipping Spoon assembly to the ISS
base. This screw is on the “slightly pointed” side of the assembly and will be
on the “down” side of the ISS base when the ISS is held with the Wind Vane
on the right.
on the “down” side of the ISS base when the ISS is held with the Wind Vane
on the right.
Note:
Do not unscrew the hex-head screw on the opposite “flat” side of the module (see second drawing,
below).
below).
Tipping Spoon
Assembly
Unscrew this Phillips
head screw to remove
module from the ISS
head screw to remove
module from the ISS
View of Tipping Spoon module after removal from underside of ISS base.
Anemometer
Battery compartment
cover
cover
Do not unscrew this hex-
head screw when remov-
ing module from the ISS.
Doing so will alter the
sensitive calibration of
this module.
head screw when remov-
ing module from the ISS.
Doing so will alter the
sensitive calibration of
this module.