Davis Instruments DWW6800 User Manual

7

Note: 

Register your Gateway online and wait 5 to 10 minutes BEFORE you power it up to 
avoid a delay in uploading data. If you already powered up before registering, 
remove power from the Gateway, register, then repower.

1. When you receive the e-mail with the Activation Code, follow the instructions 

in the e-mail. (Or, go to www.weatherlink.com; click on Register. Select the 
Gateway option.)

2. Read and agree to the Terms of Use.
3. Enter the DID and KEY located on the 

sticker on the cover of this manual and 
on the sticker inside the Vantage 
Connect shelter.

4. Create and enter a user name and 

password, and enter your e-mail 
address to create a new user account.

Note: 

Your user name will become part of your web page’s URL. For example if your user 
name is JohnSmith, your URL will be www.weatherlink.com/user/JohnSmith

5. Enter your time zone and indicate your Daylight Saving Time preference.
6. Enter the Activation Code received in the e-mail.
7. Click Continue with Registration.
8. Agree to the Service Agreement. 
9. Click Create Account.

You will need to know the transmitter IDs of each transmitting station before you 

configure your Vantage Connect.
Follow the prompts to enter setting and configuration:
1. Reporting Stations & Units of Measure

•

Enter the transmitter ID number of each of the transmitters that will be report-
ing to your Vantage Connect (up to 8). Choose a station type for each. (For 
example, Vantage Pro2 ID: 1, Leaf and Soil Moisture Station: ID 2.) If using 
repeaters, check the “Enable Repeaters” box and choose the final repeater’s ID 
letter for each transmitter using repeaters.

•

Choose your preferred units.

•

Click Save.

DID:  0012746AAS00

KEY: 123456