Kustom Signals Inc CCRMT User Manual

 

006-0799-00 Rev 1

 

1 

 
 

 

 
The Digital Wireless Audio DSS system is a digital frequency-agile radio designed to achieve 
excellent audio recording for the various Eyewitness Video systems. 
 
 
Transceiver Setup 
The Digital Wireless Audio DSS transceiver can be worn on a duty belt using the supplied 
pouch, or without the pouch, it can be worn/attached to an epaulet using the integrated clip.  The 
epaulet clip remains on the transceiver even if the pouch is used – it will fit easily within the 
pouch. 
 

 

 
 
Base Station Setup 
 
The base station should be mounted according to the installation instructions (007-0798-00) 
found in the base station installation kit.  You will need to attach the two antennas, then mount 
and connect the cable.  For best reception, the antennas should be perpendicular to the ground. 
 
Operation  
Place the Transceiver (Mic) unit in the Base Unit (Base).  This will “sync” the two devices.  This 
sync will remain until the Mic is placed in a different Base or until a new Mic is placed in the 
Base.  The last synchronization performed will override all earlier syncs.  Under normal 
conditions, leaving the Mic in the Base will also charge the Mic, but there is no other need to 
place the Mic into the Base. 
 
After “syncing” is complete, the operation is very simple. 
 

The transceiver can be used with or without the 
supplied mic cord.  There is an internal mic on the 
transceiver that will be used if you do not use the cord, 
or if the cord becomes damaged.  For best results, we 
recommend you use the cord.  When you plug it in, 
route the cord downward as shown, so the strap will 
hold the plug securely in place.