Allied Telesis Omni Antenna AT-TQ0202E User Manual

Product codes
AT-TQ0202E
Page of 68
60 | Allied Telesis Product Catalog 
Wireless
Wireless Antennas
ANTENNA 
TYPE
GAIN (dBi)
ALLIED TELESIS TenQ ANTENNA MODEL
LOBE WIDTH (º)
POLARIZATION
2.4GHz
5GHz
Horizontal
Vertical
OMNI
2
AT-TQ0500
360
45
Vertical
5
AT-TQ0500
360
30
Vertical
8
AT-TQ0201E
AT-TQ0501E
360
17
Vertical
12
AT-TQ0202E
AT-TQ0502E
360
5
Vertical
PANEL
8
AT-TQ0221E
AT-TQ0521E
75
50
Vertical / Horizontal
15
AT-TQ0222E
AT-TQ0522E
30
30
Vertical / Horizontal
20
AT-TQ0223E
AT-TQ0523E
15
15
Vertical / Horizontal
SECTOR
12
AT-TQ0241E
AT-TQ0541E
120
15
Vertical
14
AT-TQ0242E
AT-TQ0542E
60
15
Vertical
18
AT-TQ0243E
30
15
Vertical
PARABOLIC
19
AT-TQ0261E
15
15
Vertical
23
AT-TQ0561E
7.5
7.5
Vertical
24
AT-TQ0262E
8
8
Vertical
27.5
AT-TQ0562E
5.2
5.2
Vertical
Antenna Types
Omni
Omnidirectional antennas 
radiate power uniformly 
in every direction on the 
horizontal plane. Most access 
points and client devices have 
omnidirectional antennas.
Panel
A flat antenna with a radiation 
lobe similar to a cone. It is 
directional and is normally 
used for point-to-point links or 
at the end-points of a point-
to-multipoint network.
Sector
A flat antenna with a radiation 
lobe similar to a cone with 
an elliptical footprint. It is 
directional and is normally 
used in the central site of a 
point-to-multipoint network.
Parabolic
A dish-shaped, directional 
antenna with a radiation 
lobe similar to that of a panel 
antenna. It is usually larger 
than a panel and has a higher 
gain. Parabolic antennas are 
suitable for long distance 
point-to-point links.
Gain
Gain expresses how much an antenna 
enhances its transmitted and received 
signals relative to a simple dipole. Gain is 
expressed in dB and is logarithmic. 
Polarization
Defines the position in space of electrical 
and magnetic fields. The best signal 
transfer happens when both transmitting 
and receiving antennas have the same 
polarization. A 90° difference in 
polarization between transmitting and 
receiving antennas may produce up to 
-30dB of signal attenuation.
Loss
Loss is the attenuation, or reduction in 
power, of a system, expressed in dB. All 
cables and connector devices have a loss 
variable and must be considered when 
designing a wireless system, especially 
when directional antennas are used.
Top View
Top View
Top View
Top View
Side View
Side View
LOW GAIN
HIGH GAIN
An omnidirectional antenna concentrates 
the signal in a 360° belt around it. 
The higher the gain, the thinner the 
belt, resulting in a better signal far 
from the antenna — but a narrower 
communication area.
Panel and parabolic antennas have a 
nearly circular footprint. Low gain panels 
can be used for both short distance 
point-to-point and point-to-multipoint 
links as well as straight roads coverage. 
High-gain panel and parabolic antennas 
produce such a small spot that they 
should be deployed only in medium- to 
long-distance point-to-point links.
A sector antenna footprint is a horizontal 
ellipse with a width of 30°, 60°, 90° or 
120°. High gain sector antennas have a 
vertically thinner footprint while keeping 
the same horizontal width, suited for the 
central site of a point-to-multipoint link or 
coverage of a certain “sector” in mobile 
networks.