Universal Scientific Industrial Co. Ltd. ODX200B User Manual
20
Aligning the Antenna
Basic Installation
2
After connecting the PoE to an electrical outlet, a diagnostic routine takes
place. When startup is complete, the LEDs lights on the PoE display the
unit’s operational state.
place. When startup is complete, the LEDs lights on the PoE display the
unit’s operational state.
There are a total of seven LEDS. A description of their function is listed as fol-
lows:
lows:
CAUTION:
WHEN INSTALLING THE DEVICE USING CROSS-OVER
ETHERNET CABLES:
•
DO NOT press the reset button on the PoE adapter for more
than 5 seconds.
than 5 seconds.
•
DO NOT plug in the cross-over cable while the 5 RSSI LEDS
on the PoE adapter are blinking.
on the PoE adapter are blinking.
LED
Description
LED
Description
Lights green when
powered on
powered on
Lights green when
Ethernet is active
Ethernet is active
Five RSSI LEDs display connec-
tion strength:
tion strength:
Excellent signal
Strong signal
Normal signal
Weak signal
No signal
!
DA
TA OUT
DA
TA IN