Lexmark International Inc M11003 User Manual

Click AirPort.

Click Advanced > TCP/IP or TCP/IP.
The “Router” entry is typically the wireless access point.

Type your user name and password when prompted.

Click OK.

On the main page, click Wireless or another selection where settings are stored. The SSID will be displayed.

Write down the SSID, security type and the WEP key/WPA passphrase (if shown).
Notes:

Make sure you copy the network information down exactly, including any capital letters.

Store the SSID and the WEP key or WPA passphrase in a safe place for future reference.

The printer only supports wireless printing through AirPort base stations for Mac OS X 10.5 or later.

If you have completed the configuration for wireless printing and all of the settings appear to be correct, but the

printer does not print, then try one or more of the following:

Do not attempt to print, remove the installation CD, or detach the installation cable until you see the Wireless

Setup Successful screen.

Confirm that the printer is enabled:

Click  , or click Start and then click Run.

In the Start Search or Run box, type 

.

Press Enter, or click OK.
The printer folder opens.

Right-click the new printer; from the menu, select Use Printer Online.

Close the Printers or Printers and Faxes window and try printing again.

You may need to select the wireless printer from your computer to use the printer wirelessly.

Click  , or click Start and then click Run.

In the Start Search or Run box, type 

.

Press Enter, or click OK.
The printer folder opens.

Right-click the printer in the folder with the matching name and model number followed by ”(Network).”

Troubleshooting