Xircom EAG2919 User Manual
Eagle II GSM Radio Module Technical Manual Preliminary Draft: 08/31/00
34
Part Number: 07100017 version 00.04
© 2000 Xircom, Inc. All rights reserved.
All trademarks and copyrights are the property of Xircom, Inc.
All trademarks and copyrights are the property of Xircom, Inc.
Initiating a Voice Call
The Eagle II module supports the AT commands for requesting to initiate both mobile-
originated (MO) and mobile-terminated (MT) voice calls.
originated (MO) and mobile-terminated (MT) voice calls.
Mobile-Originated Call
The following example provides the AT command for requesting the Eagle II module to
initiate a mobile-originated (MO) voice call.
initiate a mobile-originated (MO) voice call.
This command assumes that the Eagle II module is configured for the Data Call
mode (default).
mode (default).
App > Eagle
AT + FCLASS = 8
Sets the traffic channel type to Voice mode
Eagle > App
OK
App > Eagle
ATD “1234567890”
AT command to dial the telephone number
Eagle > App
OK
App > Eagle
ATH
Terminates the call
Eagle > App
OK
Mobile-Terminated Call
The following example provides the AT command for requesting the Eagle II module to
initiate a mobile-terminated (MT) voice call.
initiate a mobile-terminated (MT) voice call.
This command assumes the Eagle II is configured for the Data Call mode (default).
App > Eagle
AT + FCLASS = 8
Sets the traffic channel type to voice.
Eagle > App
OK
Ring
Displayed for incoming call notification
App > Eagle
ATA
Command to manually answer the MT call. If “Auto
Answer” is required, the ATS0=x command, where x
= “the number of rings” is used.
Answer” is required, the ATS0=x command, where x
= “the number of rings” is used.
Eagle > App
OK
App > Eagle
ATH
Terminates the call
Eagle > App
OK