Kodak KAARDC Ni-MH 3952223 Leaflet

Product codes
3952223
Page of 1
50.0+/-0.5
4.7+0/-1.0
1.2 min
14.2+/-0.3
Dimensions are in millimeters and include label.
 
The Data in this publication represents product tested under the conditions specified.  They 
do not represent standards or specifications which must be met by Eastman Kodak Company.  
Company  reserves  the  right  to  change  and  improve  product  characteristics  at  any  time.
For more information, contact  Eastman Kodak Company, 343 State Street, Rochester NY 
14650-0811, Phone 1-800-242-2424               
www.kodak.com/go/batteries
©  Eastman Kodak Company, 2009                                Kodak is a trademark.
System:     
 
Nickel-Metal Hydride battery 
Designation:    
 
ANSI 1.2H3, IEC HR6
Nominal Voltage:   
 
1.2 Volts  
Nominal Capacity:    
 
2600 mAh 
Minimum Capacity:    
 
2500 mAh
Charging Condition:                 
260 mA for 16h    
Max. Discharge:  
 
4.8 A Continuous to 1.0 V
 
 
7.2 A Intermittent 
Temperature Ranges:      
 
Operating     
  
0°C  to +50°C  
Storage        
 
-20°C  to +30°C 
Charging  Approx.  
 
0°C  to +40°C 
Weight:   
 
28.0 grams  
Terminals:    
 
Flat Contacts  
Jacket:      
 
PVC Label 
Internal Impedance:   
 
0.020 Ohms (typical)  
Charging Cycles:   
 
Up to 400 
 
 
Maximum life is achieved by shallow discharge and  
 
 
 
 
charge conditions.
 
Note: 
1) No added Mercury / 99.9999% Mercury Free — 2) No added Lead /99.999% Lead Free  
3) No added Cadmium / 99.9999% Cadmium Free  —4) No added PFOS (Perfluorooctane sulfonates) 
5) This battery complies with ANSI C18,  IEC 60086, and EU Directive 2006/66/EC, 2006/122/EC
6) Batteries are NOT subject to European RoHS regulations
7) MSDS sheets are available on the Kodak website.
8) Operating at extreme temperature will significantly affect service and cycle life  
9) For best performance after a long period of non-use, charge and discharge the battery several times
KAARDC-2600
KAARDC Ni-MH Rechargeable Battery
Effective:  April 23, 2009