Well Communication Corporation AWR-8210 User Manual
3
Specification
Specification Model Name:
1 Port ADSL Wireless Router Annex A / Annex B/UR2
Chipset
ADSL Wireless Router Chip:(CX82310-14/24)
ARM940T Processor
ARM940T Processor
Line Connection
RJ-11(2 wires) Line/Phone ,USB, RJ-45 (4 port) , RS -232CConnection
Features
High speed Asymmetric Digital Subscriber Line (ADSL) connection to the telephone line
Complete USB ADSL modem solution
DMT modulation and demodulation
Supports splitter less ADSL implementation
Tone detection for low power mode
ATM SAR performed in software driver
Complete USB ADSL modem solution
DMT modulation and demodulation
Supports splitter less ADSL implementation
Tone detection for low power mode
ATM SAR performed in software driver
Compliant with ADSL standards
Full-rate ANSI T1.413 Issue 2 and ITU G.dmt (G.992.1) standards
Splitter less ITU G.lite (G.992.2) specification
Splitter less ITU G.lite (G.992.2) specification
Full-rate adaptive modem
Maximum downstream rate of 8 Mbps
Maximum upstream rate of 1 Mbps
Maximum upstream rate of 1 Mbps
G.lite adaptive modem
Maximum downstream rate of 1.5 Mbps
Maximum upstream rate of 512 Kbps
Maximum upstream rate of 512 Kbps
WAN Mode Support
PPP over ATM (RFC 2364)
PPP over Ethernet (RFC 2516)
PPP over Ethernet (RFC 2516)
LAN Mode Support
Bridged/routed Ethernet over ATM (RFC 2684/1483)
Classical IP over ATM (RFC 1577) and PPP over Ethernet (RFC 2516)
Classical IP over ATM (RFC 1577) and PPP over Ethernet (RFC 2516)
Bridge Mode Support
Ethernet to ADSL self-learning Transparent Bridging (IEEE 802.1D)
Supports up to 128 MAC learning addresses
Supports up to 128 MAC learning addresses
Router Mode Support
IP routing-RIPv2 (backward compatible with RIPv1)
Static routing
DHCP (Dynamic Host Configuration Protocol) Server and Client
NAPT (Network Address and Port Translation)
NAT (Network Address Translation)
ICMP (Internet Control Message Protocol)
Simultaneous USB and Ethernet operation
IGMP (Internet Group Management Protocol)
Static routing
DHCP (Dynamic Host Configuration Protocol) Server and Client
NAPT (Network Address and Port Translation)
NAT (Network Address Translation)
ICMP (Internet Control Message Protocol)
Simultaneous USB and Ethernet operation
IGMP (Internet Group Management Protocol)
Ethernet Interface
Compatible with IEEE 802.3 standard
10/100 Mbps auto selection
10/100 Mbps auto selection
802.11b/b+ interface
(Option)
(Option)
Support for Intersil PRISM-based designs (11Mbps)
Connects to an 802.11b PCMCIA card
128-bit and 64-bit WEP support
Support for TI DSSS Technology designs (22Mbps)
Connects to an 802.11b+ PCMCIA card
256-bit and 128-bit and 64-bit WEP support
Connects to an 802.11b PCMCIA card
128-bit and 64-bit WEP support
Support for TI DSSS Technology designs (22Mbps)
Connects to an 802.11b+ PCMCIA card
256-bit and 128-bit and 64-bit WEP support
USB host Inerface
Compliant with USB Specification, Revision 1.1
PTT and Safety
FCC Part 15/Part 68, CE
OS
WIN 98SE ; WIN 2000
ΙWIN MEΙWIN XP
System Requirement
PII-266 + 32M RAM
Power
External AC adapter
Input: 90-120V or 200-240V , 50/60Hz
Output: 9VAC/800mA
Input: 90-120V or 200-240V , 50/60Hz
Output: 9VAC/800mA
LED Indication
Power, Ready, Showtime, TXD/RXD, Speed 10M/100M, Link/Activity
Antenna
2 Antenna Optional
SIZE
196mm * 150.5mm
Software Upgrade
Upgrade by USB port