GIGA-BYTE TECHNOLOGY CO. LTD. GN-B46B User Manual
8
GN-B 46B Wireless B roadband Router User Guide
Note: Please check if the light of the WAN port of the GN-B46B is lit. If not, try to use the
cross over Ethernet cable.
Wireless Connect to a PC
Step1.
Turn off your network’s hardware, including the Router, PCs and cable or ADSL
modem.
Step2.
Connect an Ethernet cable form your cable or ADSL modem to the WAN port of
the GN-B46B.
Step3.
Connect the power adapter to the power connection slot of the GN-B46B, and
then plug the power adapter into a power outlet.
Step4.
Power on the cable or ADSL modem, PCs. The connection procedure is
completed then go to the “Chapter3 Configuration of the PCs”.
Note: If you use wireless connection, please refer to the wireless LAN card manual
which provided by your wireless card manufacture. The SSID of the Wireless LAN
card should be the same as the SSID of the GN-B46B. The default value is
“GIGABYTE” (or “any”, if your wireless LAN card can support.), please do notice
the form of the SSID value whether is captial or not.
Step1.
Turn off your network’s hardware, including the Router, PCs and cable or ADSL
modem.
Step2.
Connect an Ethernet cable form your cable or ADSL modem to the WAN port of
the GN-B46B.
Step3.
Connect one end of an Ethernet cable to one of the LAN ports (LAN 1-4) on the
router, and the other end to an Ethernet port on a PC.
Wired Connect to a PC
Step4.
Connect the power adapter to the power connection slot of the GN-B46B, and
then plug the power adapter into a power outlet.
Step5.
Power on the cable or ADSL modem, PCs. The connection procedure is
completed then go to the “Chapter3 Configuration of the PCs”.