Afimilk Agricultural Cooperative Ltd. 4256204 User Manual
Initial
Reader Communication
Chapter
4
June
2016
AfiAct
II™ Installation Manual
Page
73
10.
Wait until the system is connected.
Note:
If the connection takes too long (more than 3 minutes), restart the
Reader
(POWER OFF and then back ON.
11.
Verify that all the Wi‐Fi LEDs (WLAN & signal strength) on the Reader are ON
(see
1.4.1).
If the Wi‐Fi LEDs don’t work then you will have to start this stage
from
the beginning.
12.
After connecting to the wireless network, disconnect the network cable and re‐
start
the Reader:
a.
Use the transformer power button to turn the device off.
b.
Disconnect the network cable.
c.
Power the Reader ON using the transformer switch
d.
Wait for the device to locate the network (~1 minute).
e.
The communication verification is now done by checking::
At
least 2 communication LEDs are ON
AfiControl
displays the Reader’s IP, see
4.2
f.
Close the Reader configuration interface (browser)
Initial
Reader communication is complete. Disconnect and Take the
Reader
to the Shed.