Audio-Technica Corporation MTU301 User Manual
mtu301 Owner’s Manual
Page 2 of 6
equipment, and will also void Audio‐Technica warranty coverage. For further information, Please
contact your local office of the FCC as applicable.
Battery precautions
Each mtu301 Body‐pack Transmitter is powered by 2 AA batteries: AA 1.5V alkaline batteries
(included) or rechargeable SANYO brand AA Nickel Metal Hydride.
When using rechargeable batteries, always use rechargeable AA NiMH batteries.
Rechargeable batteries must be charged before initial use or after prolonged non‐use.
When inserting batteries into the mtu301, observe correct polarity as marked.
Do not use a leaking battery. If battery leakage occurs, avoid contact with skin. If skin contact
Rechargeable batteries must be charged before initial use or after prolonged non‐use.
When inserting batteries into the mtu301, observe correct polarity as marked.
Do not use a leaking battery. If battery leakage occurs, avoid contact with skin. If skin contact
occurs, immediately wash the affected skin area thoroughly with soap and water. If battery
leakage comes into contact with your eyes, immediately flush with water and seek medical
attention.
leakage comes into contact with your eyes, immediately flush with water and seek medical
attention.
Do not expose the batteries to fire. Do not heat, deform, solder, disassemble or modify.
Do not peel off or damage the outer tube of a battery.
If batteries become damaged, dispose of properly.
Please recycle rechargeable batteries.
Do not use these batteries together with dry cells, other types of batteries, new and old
Do not peel off or damage the outer tube of a battery.
If batteries become damaged, dispose of properly.
Please recycle rechargeable batteries.
Do not use these batteries together with dry cells, other types of batteries, new and old
batteries together, or batteries with different charge levels.
Note: This SpectraPulse® system is approved for indoor use only.
Note: See SpectraPulse® Owner’s Manual for full system specifications.
Contents
What’s in the box
Page x
mtu301 Body‐pack Transmitter Installation & Operation
Page x
mtu301 Body‐pack Transmitter Controls and Functions
Page x
mtu301 Body‐pack Transmitter Specifications
Page x
What’s in the box:
SpectraPulse® mtu301 Body‐pack Transmitter
AA 1.5V alkaline batteries (2 batteries per transmitter)
AA 1.5V alkaline batteries (2 batteries per transmitter)
Note: For SpectraPulse® system operation, see SpectraPulse® Owners Manual.
mtu301 Body‐pack Transmitter
Installation & Operation
Thank you for purchasing the mtu301 Body‐pack Transmitter, a component of Audio‐Technica’s award‐
winning SpectraPulse® Ultra Wideband Wireless Microphone System. Please follow the information
contained in this manual closely, and refer to the SpectraPulse® Owners Manual for system operating
instructions.
The mtu301 Body‐pack Transmitter is optimized to work with a number of Audio‐Technica lavalier and
headworn microphones pre‐terminated with a compatible input connector; these wireless microphone
product numbers end with the designation “cW”. The cable connector latches automatically when
inserted into the microphone input jack. To unlatch and remove the connector, pull up on the
connector’s knurled metal collar.