Telenexus Inc HHR001 User Manual

1 

  

 
 
 
 
 
 

 

This preliminary user guide describes how to use the Telenexus hand-held reader. It also 

describes how to use the reader HHRDemo test application. The intended uses of this demo 

app are: 

•  

Demonstration of reader functions. 

•  

Qualification and regression testing of the CE reader software. 

•  

Reader evaluation and test tool for engineering lab use. 

Unit power is applied and removed with the On/Off button in the upper right corner of the 

key panel.  

•  

On: Press and hold the On/Off button. A high-pitch beep indicates that the button press 

has been received and that the unit is powering up. The CE desktop will appear ~10 

seconds after the beep. 

•  

Off: Press and hold the On/Off button. A low-pitch beep indicates that the button press 

has been received and that the unit is powering down. A few additional beeps indicate 

that the current reader settings are being stored in non-volatile memory prior to power 

down. 

The reader provides a Suspend mode which extends battery life while maintaining the 

application program currently being executed. The reader may be configured to auto-

matically enter the Suspend mode after a period of inactivity. The reader also may be 

immediately placed in the Suspend Mode by tapping the Start button on the WinCE task bar 

followed by tapping the Suspend button.  

Turning the power off removes all power from the system. This means any programs loaded 

in RAM and any data generated and saved in RAM since power-up are lost. Programs and 

data stored in the flash file system are maintained.