Selex Sistemi Integrati Inc. VOR2 User Manual
Model 1150A DVOR
3-64
Rev. - November, 2008
This document contains proprietary information and such information may not be disclosed
to others for any purposes without written permission from SELEX Sistemi Integrati Inc.
Figure 3-61 LCU Transmitter Temperature Readings
)
)
Note: Switches are active in Local Mode only.
Main Select 1 and Indicator
Pressing Main Select 1 switch sets transmitter 1 as the
main transmitter and places TX1 on the antenna and in
the ON mode. The indicator in the switch illuminates to
identify that TX 1 is selected as the Main.
main transmitter and places TX1 on the antenna and in
the ON mode. The indicator in the switch illuminates to
identify that TX 1 is selected as the Main.
Main Select 2 and Indicator
Pressing Main Select 2 switch sets transmitter 2 as the
main transmitter and places TX2 on the antenna and in
the ON mode. The indicator in the switch illuminates to
identify that TX 2 is selected as the Main.
main transmitter and places TX2 on the antenna and in
the ON mode. The indicator in the switch illuminates to
identify that TX 2 is selected as the Main.
Antenna 1 and Indicator
Pressing Antenna 1 switch turns transmitter 1 ON and
into the antenna. The indicator in the switch illuminates
to identify the transmitter connected to the antenna.
into the antenna. The indicator in the switch illuminates
to identify the transmitter connected to the antenna.
Antenna 2 and Indicator
Pressing Antenna 2 switch turns transmitter 2 ON and
into the antenna. The indicator in the switch illuminates
to identify the transmitter connected to the antenna.
into the antenna. The indicator in the switch illuminates
to identify the transmitter connected to the antenna.
Load 1 and Indicator
Pressing Load 1 switch turns transmitter 1 ON and into
the load. The indicator in the switch illuminates to
identify the transmitter connected to the load.
the load. The indicator in the switch illuminates to
identify the transmitter connected to the load.
Load 2 and Indicator
Pressing Load 2 switch turns transmitter 2 ON and into
the load. The indicator in the switch illuminates to
identify the transmitter connected to the load.
the load. The indicator in the switch illuminates to
identify the transmitter connected to the load.
Off 1 and Indicator
Pressing Off 1 switch places transmitter 1 in the OFF
mode without changing the relays. The indicator in the
switch illuminates when the transmitter is OFF.
mode without changing the relays. The indicator in the
switch illuminates when the transmitter is OFF.
Off 2 and Indicator
Pressing Off 2 switch places transmitter 2 in the OFF
mode without changing the relays. The indicator in the
switch illuminates when the transmitter is OFF.
mode without changing the relays. The indicator in the
switch illuminates when the transmitter is OFF.