HID Global Corporation ICLASSR10F User Manual

An ASSA ABLOY Group brand

Optical Tamper enabled by default – Once activated, when the mounting plate is 

removed, the optical tamper will open the circuit between Tamper#1 and Tamper#2 

reader control lines. Tamper#1 and Tamper#2 control lines are interchangeable. Either of 

these lines can be connected with the reader ground line to reduce the number of cable 

cores required in the reader cable. The tamper control lines can operate within 0-12 VDC 

and 0-100 mA.

Configuration – The reader can be modified to meet the specific requirements of an 

installation. Configuration options include; audio visual, and CSN outputs. See the HID 

Reader Manager™ solution on www.hidglobal.com for further details.

Yellow

Beeper Input

Orange

LED Input (GRN)

Black

Ground (RTN)

Red

+VDC

Drain

Unused

Violet

*Tamper #1

Violet/White

*Tamper #2

White

Wiegand Data 1

Green

Wiegand Data 0

*  Tamper Output. When activated or when the 

reader is unpowered, the circuit between 

Tamper#1 and Tamper#2 reader control lines 

will open.

Note:  Wiring the reader incorrectly may 

permanently damage the reader.

www.hidglobal.com/PLT-03681

 

ƒ

Scan the QR code or visit the link to 

see the multi-language electronic 

version of this document.

 

ƒ

Lisez le code QR ou suivez le lien 

pour consulter la version française de 

ce document.

 

ƒ

Escanee el código QR o visite el 

vínculo para consultar la versión en 

Español de este documento.

 

ƒ

Scannen Sie den QR-Code oder 

öffnen Sie den Link für die deutsche 

Version dieses Dokuments.

 

ƒ

Faça a leitura do código QR ou acesse 

o link da versão em português deste 

documento.

 

ƒ

Scansiona il codice QR o visita il 

link della versione Italiana di questo 

documento.

 

ƒ

Отсканируйте QR-код или пройдите по 

ссылке, чтобы получить версию этого 

документа на русском языке.

 

ƒ

扫描 QR 码或访问此 文档的中文版本的

链接。

 

ƒ

この文書の日本語版を表示するには、QR 

コードをスキャンするか、リンクを クリ

ックします。

 

ƒ

QR 코드를 스캔하거나 링크를 방문하면 이 

문서의 한국어 버전을 볼 수 있습니다.

Turn on the power. 

The reader should beep and the 

light bar should flash.

1

3

2

4

9" 

(0.23m)

© 2018 HID Global Corporation/ASSA ABLOY AB. All rights reserved. 

HID, the HID Brick logo, the Chain Design, HID Reader Manager, 

HID Mobile Access, and iCLASS SE are trademarks or registered 

trademarks of HID Global, ASSA ABLOY AB, or its affiliate(s) in the 

US and other countries and may not be used without permission. All 

other trademarks, service marks, and product or service names are 

trademarks or registered trademarks of their respective owners.

 

ƒ

iCLASS SE R10 Reader (1)

 

ƒ

Installation Guide (1)

 

ƒ

0.138-20 x 1.5" screws (2) – for installing the 

reader directly to a wall (no junction box)

 

ƒ

0.138-32 x 0.375" screws (3) – for Imperial 

(US) junction box installation (2) and 

attaching the reader to the back plate (1)

 

ƒ

M3.5 x 12mm screws (2) – for Metric (EU etc) 

junction box installation

 

ƒ

0.138-32 x 0.375" security screw (1) – 

alternative security screw for attaching the 

reader to the back plate

 

ƒ

Cable, 5-9 conductor (Wiegand or 

Clock-and-Data)

 

ƒ

Certified DC power supply

 

ƒ

Metal or plastic junction box

 

ƒ

Security tool HID 04-0001-03 (for anti-

tamper screw)

 

ƒ

Drill with various bits for mounting hardware

 

ƒ

Mounting hardware

 

ƒ

Reader spacer (PN: 6132AKB) when 

mounting on or near metal or metal junction 

boxes - see How to Order Guide

 

ƒ

IP65 Mounting gasket (PN: IP65GSKT-R10, 

10 pcs per kit), recommended for outdoor 

installation

 

ƒ

Junction box

iCLASS SE® Reader

13.56 MHz / 2.4 GHz Contactless

R10

PLT-03314, Rev. A.1

1.  Align the top of the reader with the top of the backplate.

2. Hook the top of the reader on the top of the backplate.

3. Align the bottom of reader with the bottom of the backplate.

4. Secure the reader to the backplate using one of the supplied screws: 

Security/non-tamper screw: 0.138-32 x 0.375" screw (supplied)

Non-security/standard screw: 0.138-32 x 0.375" screw (supplied)

Observe precautions for handling 

ELECTROSTATIC SENSITIVE DEVICES

Test the reader with a card. 

The reader should beep and the 

light bar should flash.

For Imperial (US): 

Use supplied 0.138-32 x 0.375" screws

For Metric (EU etc): 

Use supplied M3.5 x 12mm screws

Use supplied 0.138-20 x 1.5" screws

Junction box (not supplied) 

Mud ring required to mount on single 

gang junction box (not supplied)

1

1

2

2

Optional gasket