KAPSCH TRAFFICCOM CANADA INC. 802295 User Manual
_
JANUS
®
Multi-Protocol Reader Ver. 2: Maintenance Instructions
Confidential
UM 360450-210: A7
Page 173 of 282
© Kapsch TrafficCom Canada Inc. 2013
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict
confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or
used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: UM 360450-210 OPERATIONS AND MAINTENANCE MANUAL.DOCX
10/31/2013 7:56
Kapsch TrafficCom
3. Select either
Majority or Interpolated from the drop-down box of the required protocol located in the Lane
Assignment Algorithm box.
Note: If Interpolated is selected from the drop-down box, channels with handshake counts that differ less than
Note: If Interpolated is selected from the drop-down box, channels with handshake counts that differ less than
the Handshake Equalization Ratio will be considered to have an equal handshake count since the difference
is not considered significant.
4. If
Interpolated was selected in step 1, enter a percentage in the Handshake Equalization Ratio field.
5. Press
Enter to accept the selections.
Configuring Voting Time
Manually setting a voting time gives a fixed voting time to each channel. Dynamic voting time allows
the Reader to calculate and base the voting time on the average capture zone span time (the time it
takes for an OBU to pass through a capture zone).
Manually set the voting time for a channel
Prerequisites: Connect the service laptop to the Reader configuration port to access the CTM web
interface. Refer to Connecting a service laptop to the Reader, page 40.
1. Select the
Configuration link on the left side panel.
Result: The following screen appears.