KAPSCH TRAFFICCOM CANADA INC. 802295 User Manual

JANUS

Multi-Protocol Reader Ver. 2: Maintenance Instructions

Confidential

360450-210: A7

Page 184 of 282

These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict

confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or

used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.

FILE: UM 360450-210 OPERATIONS AND MAINTENANCE MANUAL.DOCX

10/31/2013 7:56

Kapsch TrafficCom

LED Statuses

The following table gives an overview of all the LEDs on the Reader. See the Troubleshooting Trees

beginning on page 186 to resolve any issues.

Table 6-1: CTM LED states explained

CTM LEDs

LED

State

Meaning

CGC

solid green

CGC is functional

solid red

CGC has failed

solid green

MC is functional

solid red

MC has failed

SYNC

solid green

Reader is synchronized

flashing red

Reader out of sync, or,
No activity on the Rx port on the terminal block of the

SPM (R+ and R- on the connector).
another Reader in sync network is stuck in the busy

state

flashing green/orange

Reader is out of sync and attempting recovery

off

Synchronization is disabled

ACTIVE

solid green

the CTM is active and in control. This indicates if the

primary or secondary side is active.

solid red

the CTM is not active

POWER

solid green

CTM is receiving power from PSM

off

CTM is not receiving power from PSM, or,
CTM reset switch is OFF

ACTIVITY
(Ethernet 1)

flashing green

data is being transmitted via the Ethernet 1 port

off

data is not being transmitted via the Ethernet 1 port

ACTIVITY
(Ethernet 2)

flashing green

data is being transmitted via the Ethernet 2 port

off

data is not being transmitted via the Ethernet 2 port