KAPSCH TRAFFICCOM CANADA INC. 802477 User Manual

for passenger vehicles

The TRP-8100 transponder mounts in passenger vehicles on the windshield. LEDs on the side of 

the transponder provide transaction feedback. Mount the transponder with the LEDs visible to the 

driver.

Preferred Mounting Location

Alternate Mounting Location

top of windshield

6 in.

6 in.

6 in.

rear view mirror

centerline of mirror

2 in.

centerline of mirror and transponder

transponder

LEDs

rear view mirror

approx. 1 in.

Select a mounting location, ensuring the LEDs are visible to the driver.
The  preferred  mounting location is centered and to the left behind 
the rear view mirror, leaving approximately 1 in. of the left side of the 
transponder visible.



  For reliable operation of the transponder, the vehicle must be 

equipped with only one transponder while passing through a toll 
facility. Other transponders present in or on the vehicle must be 
switched off or enclosed in an RF shield.



  The mounting location must provide direct line-of-sight 

communication between the transponder and the toll facility 
overhead antenna.



  Apply Dual Lock™ fasteners in accordance with 3M™ document 

 

70-0709-4029-4.

If the transponder cannot be mounted in the preferred mounting 
location, mount the transponder anywhere within the  alternate

 

mounting area shown below: