Benq Corporation 56W10 User Manual
BENQ Corporation
20
3.1.2.1.3. WLAN
When users choose network configuration, the submenu will pop up. Left click the
mouse on the WLAN item and the WLAN control panel will pop up.
Status
-
Network Adapter
You can select from a list of supporting network adapter in
this field. (Please kindly select BenQ W10 GPRS with
WLAN PC Card
this field. (Please kindly select BenQ W10 GPRS with
WLAN PC Card
-
State
The current state of the driver is displayed in this screen. If
the state reveals “Associated,“ it means that the normal
flow of operation is in Infrastructure mode. This shows
that the PC is already connected to access point and BSSID is also shown in the form of hex
digits. At the same time, the networking is available for the device.
In “Scanning ” state, it means that the node cannot detect the SSID to an access point within
range and is searching for an available access point. Also, if the driver failed to initiate for some
unknown reasons, this field will display an error message.
the state reveals “Associated,“ it means that the normal
flow of operation is in Infrastructure mode. This shows
that the PC is already connected to access point and BSSID is also shown in the form of hex
digits. At the same time, the networking is available for the device.
In “Scanning ” state, it means that the node cannot detect the SSID to an access point within
range and is searching for an available access point. Also, if the driver failed to initiate for some
unknown reasons, this field will display an error message.