Worthdata Inc B78 User Manual
12
Code 3 of 9 (Code 39)
Enable Code 39
0
Disable Code 39
1
Enable Full ASCII Code 39
2
Disable Full ASCII Code 39
3
Enable Code 39 Accumulate Mode
4
Disable Code 39 Accumulate Mode
5
Enable Start/stop character transmission
6
Disable Start/Stop character transmission
7
Enable Mod 43 Check Digit
8
Disable Mod 43 Check Digit
9
Enable Check Digit Transmission
A
Disable Check Digit Transmission
B
Caps Lock ON
C
Caps Lock OFF
D
For information about Code 39 and Full ASCII Code 39, see Appendix C.
See page 28 for information about Accumulate Mode (this setting also
controls Code 93 and Code 128).
See page 28 for information about Accumulate Mode (this setting also
controls Code 93 and Code 128).
Enabling Start/Stop character transmission means that the RF Laser Reader
will transmit the * Start/Stop characters to your computer along with the data.
For example, data of 1234 would be transmitted as *1234*.
will transmit the * Start/Stop characters to your computer along with the data.
For example, data of 1234 would be transmitted as *1234*.
Enabling the Mod 43 Check Digit requires the units position of your data to
match the calculation for the check digit explained in Appendix C.
match the calculation for the check digit explained in Appendix C.
If you've enabled the check digit, enabling Check Digit transmission causes
the reader to transmit it to your computer along with the bar code data.
the reader to transmit it to your computer along with the bar code data.
"Caps Lock ON" means that for all codes lower case letters read as data will
be transmitted as upper case, and upper case as lower. Numbers, punctuation
& control characters are not affected. This applies to Code 128 and Code 93
also.
be transmitted as upper case, and upper case as lower. Numbers, punctuation
& control characters are not affected. This applies to Code 128 and Code 93
also.
"Caps Lock OFF" means that letters will be transmitted exactly as read.