Worthdata Inc B78 User Manual
31
Data characters are garbled or missing.
•
Make sure you've set the reader to the same baud rate, parity, data bits
and stop bits as your serial port.
and stop bits as your serial port.
•
If Code 39 bar codes are transmitting in the wrong case (upper and
lower transposed), set Caps Lock Off on the Setup Menu.
lower transposed), set Caps Lock Off on the Setup Menu.
•
If you're getting occasional extraneous characters, try cutting the
jumper between pins 8/20 in the serial Y-Cable's DB25 connectors. See
page 7.
jumper between pins 8/20 in the serial Y-Cable's DB25 connectors. See
page 7.