Cable AML Inc OTX02-250 Internal Photos
Proprietary
FCC ID: JXZOTX02-250
Type Acceptance Report 9/4/02
18
Proprietary
6.0 INTERNAL
PHOTOS
This section should include internal photos showing the top and bottom of each printed
circuit board sufficient to clearly show component placement and chassis assembly. The
rule sections which require these photos are 2.975(a)(5), 2.983(g), 2.1033(b)(7).
circuit board sufficient to clearly show component placement and chassis assembly. The
rule sections which require these photos are 2.975(a)(5), 2.983(g), 2.1033(b)(7).
Upconverter
Composite AGC
Module
Bandpass
Filter
Power Amp
(under plate)
L.O. Pump Amp
VHF Processor
Pre-Distortion
Assembly
LNA with
Attenuator
Downconverter
Local
Oscillator
Output Filter
Notch Filter
Power Supply
#2
Power Supply
#1
X0042
Output Circular
w/Termination
AC Line Filter
Location of
ID Label
Figure 9. OTX02-250 Component Layout.
The OTX02-250 is assembled from discrete components. It does use a discrete printed
circuit board.
circuit board.