Pantech 78 User Manual

02
03
04
05

01

1.   Connect the USB cable into the Wall/USB 

Charger.

2.   Plug the USB cable into the phone’s Charging/

Data Port. Plug the Wall/USB Charger into an 

electrical outlet. The battery starts charging.

3.   Disconnect the charger when the battery is 

fully charged.

   •   Hold the small connector with the USB mark facing up. When inserting the 

connector into the Charging/Data Port on the handset, hold the connector straight 

against the port without tilting it vertically or horizontally and gently insert it. 

If the battery connector is not properly aligned, damage could occur to the charging 

connector and the phone may not be charged.

•   Failure to completely reseal the Charging/Data Port cover after charging may allow 

water or other liquids to enter the casing, damaging the handset.

• The Phone used be sure to L.P.S(Limited Power Sources) power supplies.

• The connection to USB interfaces has to be limited to USB 2.0 version or higher.