Pantech C520 User Manual
71
Outgoing: Limit all outgoing calls. When you attempt to make a call that
has the prefixed number that you previously registered, the call is barred.
•
Bar All
: Set up all outgoing calls barring.
•
Bar Prefixed
: Add and delete the prefixed number. (Prefix also means
your 10 or 11 digit number of your choosing)
•
Off
: Cancel all outgoing calls barring including the bar prefixed.
Fixed Dialing (Fixed Dialing Numbers)
Fixed Dialing
is a service that limits your access to specific numbers in the
Address Book list recorded on the SIM. Input the PIN2 to set up or cancel
this service. (PIN 2 must be correctly entered within 3 tries.)
• On: Set up Fixed Dialing service.
• Off: Cancel Fixed Dialing service.
• Fixed Dial List: Display the numbers recorded in the FDN Contact List.
• Off: Cancel Fixed Dialing service.
• Fixed Dial List: Display the numbers recorded in the FDN Contact List.
Change PIN2
This function allows you to change your phone’s PIN2 code.
Software
This function allows you to display your phone’s current software version.
Press the [
Menu
] Soft key, select
9.Settings
select
9.Software
and then
select
9.Software Version.
Software Update
This function allows you to update your software.
Press the [
Menu
] Soft key, select
9.Settings
select
9.Software
and then
select
9.Software Update.
Reset
This function allows you to delete all user settings and data from your
phone and returns it to factory-default settings.
Master Reset
This function allows you to return all user settings to factory-default settings.
1. Press the [
Menu
] Soft key, select
9.Settings
, and select
10.Reset
and
then select
1.Master Reset
.
2. At the “Reset System?” prompt, press the [Yes] soft key to continue, or
the [No] soft key to cancel.
3. Input the phone password and press the [OK] key to reset.
The default password is 1234.
Master Clear
This function allows you to delete all user data from your phone memory.
1. Press the [
Menu
] Soft key, select
9.Settings
, and select
10.Reset
and
then select
2.Master Clear
.
2. At the “Clear System?” prompt, press the [Yes] soft key to continue, or