Pantech c790 User Manual

 

The ratings are not guarantees. Results will vary depending on the user’s 

hearing device and hearing loss.  If your hearing device happens to be 

vulnerable to interference, you may not be able to use a rated phone 

successfully.  Trying out the phone with your hearing device is the best way to 

evaluate it for your personal needs. 

 

•  M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely 

to generate less interference to hearing devices than phones that are not 

labeled. M4 is the better/higher of the two ratings. 

•  T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to 

generate less interference to hearing devices than phones that are not 

labeled. T4 is the better/higher of the two ratings. 

 

Hearing devices may also be rated.  Your hearing device manufacturer or 

hearing health professional may help you find this rating.  Higher ratings mean 

that the hearing device is relatively immune to interference noise. The hearing 

aid and wireless phone rating values are then added together. A sum of 5 is 

considered acceptable for normal use.  A sum of 6 is considered for best use.  

 

 

In the above example, if a hearing aid meets the M2 level rating and the 

wireless phone meets the M3 level rating, the sum of the two values equal M5.  

This is synonymous for T ratings. This should provide the hearing aid user with 

“normal usage” while using their hearing aid with the particular wireless phone. 

“Normal usage” in this context is defined as a signal quality that is acceptable 

for normal operation.  

 

The M mark is intended to be synonymous with the U mark. The T mark is 

intended to be synonymous with the UT mark. The M and T marks are 

recommended by the Alliance for Telecommunications Industries Solutions 

(ATIS). The U and UT marks are referenced in Section 20.19 of the FCC Rules. 

The HAC rating and measurement procedure are described in the American 

National Standards Institute (ANSI) C63.19 standard. 

 

To ensure that the Hearing Aid Compatibility rating for your phone is 

maintained, secondary transmitters such as Bluetooth and WLAN components 

must be disabled during a call. See Page XX for instructions to disable these 

components. 

 

This device complies with Part 15 of the FCC Rules. Operation is subject to the 

following two conditions: (1) this device may not cause harmful interference, 

and (2) this device must accept any interference received, including 

interference that may cause undesired operation.