Pantech SHOW User Manual
12
REMOVE BATTERY
1. To remove the battery cover, push down (1) battery
door release latch with your finger tip and pull off (2)
the battery cover.
2. Push the bottom of the battery upwards while
inserting your finger into the slot (1) and remove (2)
the battery.
3. Align the cover tabs with the slots on the back of
the device and press the battery cover onto the unit
until it snaps into place.
door release latch with your finger tip and pull off (2)
the battery cover.
2. Push the bottom of the battery upwards while
inserting your finger into the slot (1) and remove (2)
the battery.
3. Align the cover tabs with the slots on the back of
the device and press the battery cover onto the unit
until it snaps into place.
CHARGING YOUR BATTERY
1. To charge, open the Charging/Data Jack cover
and connect the Wall Charger. Make sure you align
the connector as it appears in the image.
and connect the Wall Charger. Make sure you align
the connector as it appears in the image.
If the
battery
connector is not properly aligned, damage
could occur to the charging connector and the phone
may not charge.
may not charge.