Pantech SHOW User Manual
16
TURNING THE PHONE ON/OFF
TURNING THE PHONE ON
1. Press and hold the END Key [ ] until your display
turns on.
turns on.
y If “
Enter Lock Code
” appears on the display, press the
OK Key to unlock the keypad and enter your 4-digit
lock code and press the OK Key.
y The default lock code is “
1234
”.
TURNING THE PHONE OFF
1. Press the OK Key to unlock the keypad, then
press and hold the END Key [ ] until your display
turns off.
press and hold the END Key [ ] until your display
turns off.
y Immediately change or recharge the battery when
“
BATTERY LOW
” appears on the display.
y Memory may possibly be damaged if the phone turns
off due to the battery completely draining.
y Turn the phone off before removing or replacing the
battery. If the phone is on, unsaved data may be lost.
ACCESSING THE MENU
Your phone can be customized via the menu. Each
function can be accessed by scrolling with the
Directional Key [ ] or by pressing the number that
corresponds with the menu item.
1. To access the main menu from idle mode, press
the OK Key to unlock the keypad, then press the Left
Soft Key [ ] [
function can be accessed by scrolling with the
Directional Key [ ] or by pressing the number that
corresponds with the menu item.
1. To access the main menu from idle mode, press
the OK Key to unlock the keypad, then press the Left
Soft Key [ ] [
MENU
].
2. To scroll through the menu, press the Directional
Key [ ] up or down or press the number that
corresponds to the desired menu item.
3. To return to the previous page, press the CLR Key
[ ]. To exit the current menu and return to idle mode,
press the END Key [ ].
4. From idle mode, press the OK Key to unlock the
keypad, then press the Right Soft Key [
Key [ ] up or down or press the number that
corresponds to the desired menu item.
3. To return to the previous page, press the CLR Key
[ ]. To exit the current menu and return to idle mode,
press the END Key [ ].
4. From idle mode, press the OK Key to unlock the
keypad, then press the Right Soft Key [
Contacts
] to
open your Contact List.
This manual assumes that Menu Type of Display
Settings is set to Grid which is the default settings.
Settings is set to Grid which is the default settings.