Pantech SHOW User Manual
58
RESTORE PHONE
To delete all User Data and restore all settings to their
initial defaults:
1. From idle mode, press the OK Key to unlock the
keypad, press the Left Soft Key [ ] [
To delete all User Data and restore all settings to their
initial defaults:
1. From idle mode, press the OK Key to unlock the
keypad, press the Left Soft Key [ ] [
MENU
], swivel to
the QWERTY keypad and press
9. Settings & Tools
,
6. Phone Settings
,
7. Security
.
2. Enter the four-digit lock code, then press the OK Key.
3. Press
3. Press
5. Restore Phone
.
4. A confirmation message appears in the display,
select
select
Yes
, and then press the OK Key.
5. After reading the message that appears, press the
OK Key.
6. Enter the four-digit lock code, then press the OK Key.
The phone will turn off and then back on again
automatically.
SYSTEM SELECT
You can set your phone to search or roam on
another network when you are not in your home area.
Leave this setting as default unless you want to alter
the system selection as instructed by your service
provider.
1. From idle mode, press the OK Key to unlock the
keypad, press the Left Soft Key [ ] [
OK Key.
6. Enter the four-digit lock code, then press the OK Key.
The phone will turn off and then back on again
automatically.
SYSTEM SELECT
You can set your phone to search or roam on
another network when you are not in your home area.
Leave this setting as default unless you want to alter
the system selection as instructed by your service
provider.
1. From idle mode, press the OK Key to unlock the
keypad, press the Left Soft Key [ ] [
MENU
], swivel to
the QWERTY keypad and press
9. Settings &
Tools
,
6. Phone Settings
,
8. System Select
.
2. Select one of the following settings, then press the
OK Key [
OK Key [
SET
].
y
Automatic:
Scan radio channels based on the Automatic setting.
y
Home Only:
Only within your home area or home affiliated
area.
Automatic setting can be displayed as Automatic B and
Automatic A depending on PRL.
Automatic A depending on PRL.
NAM SELECTION
Enables Auto NAM (Number Assignment Modules)
or manually selects a NAM.
AUTO NAM
Automatically switches the phone to proper NAM
when you have multiple NAM registrations.
1. From idle mode, press the OK Key to unlock the
keypad, press the Left Soft Key [ ] [
MENU
], swivel to
the QWERTY keypad and press
9. Settings & Tools
,
6. Phone Settings
,
9. NAM Selection
.
2. Select
1. Auto NAM
, then press the OK Key.
3. Select
On
or
Off
, then press the OK Key [
SET
].