Silverstone ST85ZF SST-ST85ZF User Manual
Product codes
SST-ST85ZF
3.5 Timing Requirements
These are the timing requirements for the power assembly operation. The output voltages must rise from 10%
to within regulation limits (T
to within regulation limits (T
vout_rise
) within 5 to 70mS. The +5V, +3.3V and +12V output voltages should start
to rise at about the same time. All outputs must rise monotonically. The +5V output needs to be greater than
the +3.3V output during any point of the voltage rise. The +5V output must never be greater than the +3.3V
output by more than 2.25V. Each output voltage shall reach regulation within 50 mS (T
the +3.3V output during any point of the voltage rise. The +5V output must never be greater than the +3.3V
output by more than 2.25V. Each output voltage shall reach regulation within 50 mS (T
vout_on
) of each other
during turn on of the power supply. Each output voltage shall fall out of regulation within 400 mS (T
vout_off
) of
each other during turn off. Figure 1 and figure 2 show the turn On and turn Off timing requirement. In Figure 2,
the timing is shown with both AC and PSON# controlling the On/Off of the power supply.
the timing is shown with both AC and PSON# controlling the On/Off of the power supply.
Item
Description
MIN MAX Units
T
v
out_rise
Output voltage rise time from each main output.(+5Vsb < 70mS)
5
70
mS
T
vout_on
All main output must be within regulation of each other within
this time.
50
mS
T
vout_off
All main output must leave regulation within this time
400
mS
Table 10 – Output Voltage Timing
Vout
Description:
Electrical Specification
SilverStone Technology Co., Ltd.
Subject:
SilverStone Technology
Model: ST85ZF
Switching Power Supply
Document No.:
ES-850-ZEUS-01
File Name: ST85ZF.doc Page : 5
V1
10% Vout
V2
V3
V4
V3
V4
T
vout_on
T
vout_off
T
v
out_rise
Figure 1 : Output Voltage Timing