Titan Electronics Inc NETCOM423 User Manual
5.2.1. S
TARTING
N
ET
C
OM
M
ANAGER
When NetCom Manager is started, it will “Search” the NetCom in your
LAN by SNMP. This process may take up to 30 seconds. The devices
in a LAN are typically found in the first seconds. If this is enough for
you, you can stop the search by click on the “Done” button.
LAN by SNMP. This process may take up to 30 seconds. The devices
in a LAN are typically found in the first seconds. If this is enough for
you, you can stop the search by click on the “Done” button.
Image 51: NetCom Manager “Servers” Panel
The NetCom are listed here in the “Servers” panel. Since the “Search”
uses broadcast mechanisms, the range is limited. If you have routers in
your network, or you contact some NetCom via Internet, you must
“Add” them manually. Enter the network parameters to access the
NetCom.
Select a NetCom, and click on the “Properties” button, double-click the
Icon, or use a right click. Using “Verify” the NetCom Manager contacts
the NetCom to check if it is properly configured and online. “Exclude”
is only useful in conjunction with the Virtual Com Drivers, so skipped
here. “Search” repeats the search from the program start, and may be
used at any time. “Remove” removes a server from this list. This option
is most often used to clear old data from the drivers database. For
monitoring purposes you may select a NetCom, and “Start Log” for
uses broadcast mechanisms, the range is limited. If you have routers in
your network, or you contact some NetCom via Internet, you must
“Add” them manually. Enter the network parameters to access the
NetCom.
Select a NetCom, and click on the “Properties” button, double-click the
Icon, or use a right click. Using “Verify” the NetCom Manager contacts
the NetCom to check if it is properly configured and online. “Exclude”
is only useful in conjunction with the Virtual Com Drivers, so skipped
here. “Search” repeats the search from the program start, and may be
used at any time. “Remove” removes a server from this list. This option
is most often used to clear old data from the drivers database. For
monitoring purposes you may select a NetCom, and “Start Log” for
823RM WLAN, 1623RM WLAN
Page
44