Yaesu Musen Co. Ltd. 30083220 User Manual
HX370S
Page 31
5.20 RESETTING THE TRANSCEIVER’S MICROPROCESSOR
Resetting the microprocessor restores the initial, factory-supplied conditions
in the transceiver. These are called the “default” conditions. To reset the
microprocessor, first turn the transceiver off. Then, while pressing and hold-
ing in the WX and SCAN keys, turn the transceiver on. The default condi-
tions are:
in the transceiver. These are called the “default” conditions. To reset the
microprocessor, first turn the transceiver off. Then, while pressing and hold-
ing in the WX and SCAN keys, turn the transceiver on. The default condi-
tions are:
•
No channel numbers are in scan memory.
•
Channel 16 is the priority channel.
•
Channel 16 will be selected when the transceiver is turned on.
•
WX channel 01 will be recalled when the WX key is pressed.
•
Preset Channels are unassigned.
NOTE
The above procedure also resets the microprocessor. Perform this pro-
cedure if an operational problem occurs which cannot be solved by nor-
mal operating procedures.
cedure if an operational problem occurs which cannot be solved by nor-
mal operating procedures.