Yaesu Musen Co. Ltd. 30143X3D User Manual

GX3000S

Page 10

8  INSTALLATION

8.1  LOCATION

The radio can be mounted at any angle. Choose a mounting location that:

• is far enough from any compass to avoid any deviation in compass read-

ing due to the speaker magnet

• provides accessibility to the front panel controls
• allows connection to a power source and an antenna
• has nearby space for installation of a microphone hanger
• the antenna must be mounted at least 3 feet from radio

Note: To insure the radio does not affect the compass or radios performance is
not affected by the antenna location, temporarily connect the radio in the de-
sired location and:

a. Examine the compass to see if the radio causes any deviation
b. Connect the antenna and key the radio. Check to ensure the radio is

operating correctly by requesting a radio check.

8.2  ELECTRICAL CONNECTIONS

CAUTION

Reverse polarity connections will damage the radio!

Connect the power cord and antenna to the radio. Antenna and Power Supply
connections are as follows:

1. Mount the antenna at least 3 feet away from the radio. At the rear of the

radio, connect the antenna cable.

2. Connect the red power wire to a 13.8 VDC ±20% power source. Connect

the black power wire to a negative ground.

3. If an optional remote extension speaker is to be used, refer to next section

for connections.

4. It is advisable to have a Certified Marine Technician check the power output

and the standing wave ratio of the antenna after installation.

GPS Navigation Receiver

Acc

ess

ory

 Ca

ble

Optional Speaker

Antenna

Fuse

Red

Power Source

Black

Water proof
Deck Outlet

Optional CMP25 RAM+ Mic.

Optional VH-310 Handset

Optional HAIL/PA Horn

FCC ID: K6630143X3D/IC ID: 511B-30143X3D

Vertex Standard Co., Ltd.