Yaesu Musen Co. Ltd. 30173X3D User Manual
Page 29
GX1500S
10.14 INTERCOM OPERATION
If the RAM+ Mic is connected to the GX1500S, you may communicate between
the GX1500S and CMP25 RAM+ Microphones or VH-310 Handset. (Refer to
section “13.2 INTERCOM OPERATION” for CMP25 RAM+ Microphone, “14.2
INTERCOM OPERATION” for CMP25 RAM+ Microphone).
the GX1500S and CMP25 RAM+ Microphones or VH-310 Handset. (Refer to
section “13.2 INTERCOM OPERATION” for CMP25 RAM+ Microphone, “14.2
INTERCOM OPERATION” for CMP25 RAM+ Microphone).
10.14.1 Communication
1. Press and hold the [H/L(IC)] key, the mode is changed to “INTERCOM”
mode.
2. When the “INTERCOM” operation is activated, “
In-
tercom
” is displayed on the GX1500S, and “IC” is
displayed on the RAM+ Mic (or VH-310 Handset).
3. Press the PTT switch. “
Talk
” will be shown on the
display.
NOTE: A warning beep will be emitted
when the GX1500S microphone’s PTT
switch is pressed while the RAM+ Mic’s
(or VH-310 Handset’s) PTT switch is
pressed.
NOTE: A warning beep will be emitted
when the GX1500S microphone’s PTT
switch is pressed while the RAM+ Mic’s
(or VH-310 Handset’s) PTT switch is
pressed.
4. Speak slowly and clearly into the mi-
crophone, hold the microphone about
1/2 inch away from your mouth.
1/2 inch away from your mouth.
5. When finished, release the PTT switch.
6. To exit the “INTERCOM” mode and return to radio operation mode, press
6. To exit the “INTERCOM” mode and return to radio operation mode, press
the [16/9] or [CLR] key.
10.14.2 Calling
Press and hold the [H/L(IC)] key for one second when the “INTERCOM” opera-
tion is activated, a calling beep is emitted from the transceiver speaker.
tion is activated, a calling beep is emitted from the transceiver speaker.
(RAM+ Mic’s PTT switch is pressed)
(GX3500S’s PTT switch is pressed)
FCC ID: K6630173X3D/IC ID: 511B-30173X3D
Vertex Standard Co., Ltd.