Yaesu Musen Co. Ltd. 30173X3D User Manual
GX1500S
Page 72
14.2 INTERCOM OPERATION
14.2.1 Communication
1. Press the [F] key followed by the [5(IC)] key, the mode is changed to “IN-
TERCOM” mode.
2. If your GX1500S is equipped with two VH-310 Handsets (or RAM+ Mics),
select the station you wish to communicate (RADIO, RAM, or ALL) with the
[
[
]/[] key, then press the [ENT] key.
3. When the “INTERCOM” operation is activated, “IC” is dis-
played on the VH-310 Handset (and RAM+ Mic, if used)
and “INTERCOM” is displayed on the GX1500S.
and “INTERCOM” is displayed on the GX1500S.
4. Press the PTT switch, “TALK” is displayed.
NOTE: A warning beep is emitted when the RAM+ Mic PTT
switch is pressed while the transceiver
microphone’s PTT switch is pressed.
switch is pressed while the transceiver
microphone’s PTT switch is pressed.
5. Speak slowly and clearly into the mi-
crophone, hold the microphone about
1/2 inch away from your mouth.
1/2 inch away from your mouth.
6. When finished, release the PTT switch.
7. To exit the “INTERCOM” mode and
7. To exit the “INTERCOM” mode and
return to radio operation mode, press
the [F] key followed by the [5(IC)] key
again.
the [F] key followed by the [5(IC)] key
again.
14.2.2 Calling
Press and hold the [5(IC)] key for 1 second when the “INTERCOM” operation is
activated, a calling beep is emitted from the GX1500S speaker.
activated, a calling beep is emitted from the GX1500S speaker.
(VH-310’s PTT switch is pressed)
(GX3500S’s PTT switch is pressed)
FCC ID: K6630173X3D/IC ID: 511B-30173X3D
Vertex Standard Co., Ltd.