RELM WIRELESS CORP. - BK RADIO DPHX51 User Manual

   

16                                                                                            BK Radio 

3. Press [PRI] to toggle the function on/off 

when the desired menu item is displayed. 

When the display flashes, the function is 
enabled. 

To lock/unlock the keypad, press and hold the 
[FCN] key.   

1.  If enabled, a long [PRI] key press will 

activate Emergency Mode even when the 
keypad is locked.  

2.  PTT unlocks the keypad during transmit 

for DTMF key presses if the radio is 
programmed for DTMF operation. 

3.  The keypad will be automatically unlocked 

when Unit-To-Unit Mode is entered by 
pressing PTT to respond to a Unit-To-Unit 
call, when Unit-To-Unit callback is 
enabled.  The keypad will be re-locked 
when Unit-To-Unit Mode is exited. 

1.  Slide Switch B

 

(

SCAN

)

up. 

2.  Slide Switch C (priority) down. 

The display indicates scan operation by 
flashing

 

or two flashing dashes at the 

right side of the display if Numeric Display 
Mode is selected.  

Scan operates only while the radio is not 
transmitting. The radio checks for signals on 
channels in the preset Scan List, as well as 
the channel selected by the Channel Selector 
knob. 

When a signal is detected, scanning stops and 
the message is received. The received 
channel is shown in place of the transmit 
channel.   

 

 LABEL      3  
 

 ch     1 - -    

DPH Owner’s Manual                                                                           29           

1. Press 

the 

[#] key to toggle a decimal on or 

off to the right of the character in position 
7. The decimal moves left with the number 
in position 7 as new numbers are entered. 

2.  Use the following steps to enter a number 

in position 8 or characters in positions 1-8: 

a. Press the [PRI] key repeatedly to 

cycle through characters 0-9, A-Z, -, *, 
$, /, +, %, \, |, _, <, >, h, blank, then 
back to the start again. 

If you pass the desired character, 
press the [PRI] key repeatedly until 
you return to the start and reach that 
character again. 

b. Press the [FCN] key to shift the 

display left by one position, leaving 
position 8 blank. 

c. Press the [PRI] key repeatedly to 

enter the next character, or press the 
[FCN] key a second time to enter a 
blank space. 

d.  To abandon changes, press the [CLR] 

key, restoring the original label. 

e. Press 

the 

[ENT] key to store changes. 

Press [ENT] to display the numeric ID.  Press 
[CLR] then enter the new ID (up to 7 digits).  
Press  [ENT] to store the new ID.   Select a 
new ID to be programmed, or press and hold 
[ENT] to exit Programming Mode (the PRG 
annunciator will be extinguished).     

 PRG               ID   

 145