Intel AXXRSBBU7 User Manual
Intel® RAID Smart Battery AXXRSBBU7 Technical Product Specification
Overview
1. Overview
This document describes the key hardware components, firmware, and software utility
requirements for the Intel
requirements for the Intel
®
RAID Smart Battery AXXRSBBU7. It provides data integrity for the
RAID (Redundant Array of Inexpensive Disks) solution by ensuring that the data passing
through the cache is protected during a power outage until written to the hard drives.
through the cache is protected during a power outage until written to the hard drives.
The Intel
®
RAID Smart Battery AXXRSBBU7 is available as an accessory for some Intel
®
RAID
Controller models.
The Intel
®
RAID Smart Battery AXXRSBBU7 contains the following components:
Board-to-board connector: The Intel
®
RAID Smart Battery AXXRSBBU7 can connect to
the base RAID controller through this connector, as a daughter card to the base RAID
controller.
controller.
20-pin remote battery connector: The Intel
®
RAID Smart Battery AXXRSBBU7 can
remotely connect to the Remote Extender Board (REB) component through this
connector.
connector.
Remote Extender Board (REB): The REB component is used to connect to the base
controller through the board-to-board connector, as a daughter card to the base
controller, so as to provide a 20-pin inline connector for remote battery installation
support.
controller through the board-to-board connector, as a daughter card to the base
controller, so as to provide a 20-pin inline connector for remote battery installation
support.
Remote battery connecting cable: A 20-inch 20-pin connector cable is provided to
connect the REB card to the battery.
connect the REB card to the battery.
The Smart Battery Module which includes the following components:
Smart Battery circuit board: This ensures that the battery is maintained at optimal
performance and charge levels. This circuit is based on the Texas Instruments
bq2060A SBS v1.1-compliant gas gauge IC*.
performance and charge levels. This circuit is based on the Texas Instruments
bq2060A SBS v1.1-compliant gas gauge IC*.
Battery pack: The battery pack is mounted on the circuit board. It includes a separate
internal circuit logic board and Li-Ion (Lithium Ion) batteries. The logic board provides
sensing and management logic to support battery charge, discharge, and monitoring.
internal circuit logic board and Li-Ion (Lithium Ion) batteries. The logic board provides
sensing and management logic to support battery charge, discharge, and monitoring.
5-pin battery pack connecting cable: The connector is used for communicating
between the Smart Refresh circuit board and the battery pack.
between the Smart Refresh circuit board and the battery pack.
Monitoring / notification software: Monitoring is accomplished through the Intel
®
RAID
BIOS Console 2, Intel
®
RAID Web Console 2, or Intel
®
RAID Command Line Utility 2
utilities. The software notifies the user of failures or corrective actions.
Revision 1.0
Intel order number E70473-001
1