CALAMP WIRELESS NETWORKS INC. BDP3-AET User Manual

Page of 38
 
 
120 20191-002 
 Paragon-III Technical Manual
 
v
 
Definitions 
 
The following terms are used throughout this document. 
 
Asynchronous 
Information that can be sent at random times, and not synchronized to a clock. 
Transmission characters begin with a “start” bit and end with a “stop” bit. 
AVL 
Automatic Vehicle Location. Optional feature that involves using GPS (Global 
Positioning System) signals from the mobile unit by the Host PC.  
BDLC-III 
Base Station Data Link Controller (PD = Parallel decode). An async controller-
modem designed for the radio base station in mobile systems. A component of 
Paragon-III.  
E-DBA 
Dataradio’s Enhanced Dynamic Bandwidth Allocation. 
DCE 
Data Communications Equipment. This designation defines the direction (input 
or output) of the various RS-232 interface signals. Modems are always wired as 
DCE.  
DTE 
Data Terminal Equipment. This designation defines the direction (input or out-
put) of the various RS-232 interface signals. Most user equipment, as well as 
PCs, are wired as DTE. 
Gemini-III 
High specs dual DSP mobile radiomodem with Dataradio PD technology (Paral-
lel Decode) 
IP 
 
Network Speed 
This is the bit rate on the RF link between units. Could be different from COM 
port baud rate
Paragon-III
 
Next generation of Paragon/PD+. Runs up to 128 kb/s 
Parallel Decode 
Technology featuring dual receivers for added data decode sensitivity in multi-
path and fading environments. 
Radio Assembly  Radio modules used in Paragon-III and available in two distinct series depending 
on radio’s frequency band. 
RS-232 
Industry–standard interface for serial data transfer.  
VIS 
Vehicular Information Solutions. Dataradio’s name for a series of products spe-
cially designed for mobile data. 
CDip 
Windows based "Commands & Data over IP" radio-modem Software. This soft-
ware allows basic tests, unit configuration, and troubleshooting.