Acumen Technologies Ltd EON0304 User Manual
Acumen Model EON03/04
Fireplace Remote Control
Installation and Operation Instructions
The Acumen Model EON03/04 Remote Control is designed for use with decorative gas fireplace
and wall heaters using SIT 852 Nova gas valve and digital flame control millivolt valve.
The Model EON03/04 Transmitter is an three/eight-button hand held transmitter, which turn
the gas on/off or as a thermostat, adjust the flame height, The display of the transmitter
shows the clock, current room temperature, target temperature, timer setting, on/off status
and low battery indicator.
and wall heaters using SIT 852 Nova gas valve and digital flame control millivolt valve.
The Model EON03/04 Transmitter is an three/eight-button hand held transmitter, which turn
the gas on/off or as a thermostat, adjust the flame height, The display of the transmitter
shows the clock, current room temperature, target temperature, timer setting, on/off status
and low battery indicator.
1.0 Operation Instructions
The Model EON03/04 Remote Control has 1or6 operating modes. They are: Manual or Manual, Auto,
Timer, Flame Adjustment and Transmitter Location Function. You can only operate the Flame
Adjustment in Manual or Auto Modes. Use the Up and Down buttons to set the target temperature
between 45
Timer, Flame Adjustment and Transmitter Location Function. You can only operate the Flame
Adjustment in Manual or Auto Modes. Use the Up and Down buttons to set the target temperature
between 45
o
F and 90
o
F, or 8℃ and 32℃.
1.0.1. Manual
Mode
Press the Manual On/Off button once to light the fireplace. Push the button again to turn it off.
In Manual mode the Remote Transmitter will not turn the fireplace off even if the room temperature
exceeds the target temperature.
1.0.2.
1.0.2.
Auto Mode(EON04 olny)
1. Set the desired target temperature.
2. Press the Auto On/Off button once to activate the Auto mode. In Auto Mode the Remote
2. Press the Auto On/Off button once to activate the Auto mode. In Auto Mode the Remote
Transmitter will automatically turn on the fireplace when the room temperature is below
the target temperature and turn off the fireplace when the room temperature is above
the target temperature.
the target temperature and turn off the fireplace when the room temperature is above
the target temperature.
3. Press Auto On/Off button or Manual On/Off buttons to turn off the fireplace (if it is
already on) and exit Auto Mode.
1.0.3.
Timer Mode(EON04 olny)
1. You can set the timer to the length of time you want the fireplace to operate (1 to 120
minutes).
2. Press the ”TMER” button once. The Timer display “----“ will blink.
3. Press the Up and Down buttons to set the timer. The LCD will display the time chosen.
4. The timer setting can be cancelled at any time by press and hold the ”TIMER” button.
5. Press Manual or Auto On/Off button to turn on the fireplace.
6. The fireplace will turn off at the end of the timer setting.
3. Press the Up and Down buttons to set the timer. The LCD will display the time chosen.
4. The timer setting can be cancelled at any time by press and hold the ”TIMER” button.
5. Press Manual or Auto On/Off button to turn on the fireplace.
6. The fireplace will turn off at the end of the timer setting.
1.0.4. Flame
Adjustment
1.
In Manual and Auto modes you can adjust the flame height of the fireplace.
2.
Press the Flame button and use the Up and down arrow to adjust the flame height to 1,
2, 3 and 4.
1.0.5. Child-Proof Function
1. Remove the cover at the back of the Remote Transmitter to expose the CHILD-PROOF switch.
Slide the CHILD-PROOF switch to position marked C/P to activate the CHILD-PROOF function
“*Child-Proof *” will appear on the LCD.
2. In CHILD-PROOF the Remote Transmitter will not operate the Remote Receiver until the
“child-proof” code is used or the switch is returned to the other position.
3. Press the Up and Down buttons in the following sequence, Up-Down-Down-Up-Down, within