Crestron Electronics Inc STX-1550C User Manual

Crestron STX-1550C 2-Way RF Compact Color Touchpanel

••

 

1. Before making any connections to the touchpanel, verify that control 

system is properly connected to the PC (using cable 15717 and adapter) 
and powered on.  

2. Attach the stereo connector end of the programming cable, part number 

15710, to the touchpanel.  

3. Attach the RJ11 connector end of the programming cable, part number 

15710, to the connector labeled NET on the control system.  

4. Attach the appropriate external power pack or equivalent to touchpanel 

and plug into outlet. At the PC, make sure that no programs accessing 
the COM port of the PC are running.  

5. Start SIMPL Windows or VT Pro-e.  

6. From the SIMPL Windows or VT Pro-e menu bar, select Tools | 

Viewport to open the Crestron Viewport.  

NOTE:  SIMPL Windows may open with an opening splash screen and may display 
the “What do you want to do?” dialog box. If so, close the dialog box and continue.  

7. Refer to figure on the next page. From the Viewport menu, select 

Setup | Communications settings (alternatively, depress Alt+D) to 
open the Port Settings dialog box.