Bosch Security Systems Inc. 0117-06 User Manual

Copyright © 2001 Detection Systems, Inc.

SEFD1 Unser Guide

 P/N: #####Ar1  5/1/01

The LED is blinking on and off and will

not stop.

The flashing LED indicates the

batteries are low. Replace the

batteries.
The unit may have experienced

conditions similar to a fall. Be sure to

place the unit down gently to avoid

false alarms.

The unit alarmed when I took it off and

set it down.

You may have accidentally pressed the

help button when removing the unit.
Be sure the base station is receiving
power. The green power indicator

should be on.
The unit may be out of range. Test the

help button from a location closer to the
base station.

I press the help button and nothing
happens.

The batteries may be dead. Replace

the batteries and test the unit. The LED

on the front of the unit should come on

for 10 seconds if good batteries are

installed.

My pendant got wet and the batteries

are corroded.

Replace the batteries.

I put new batteries in the unit and the

LED is on.

The LED comes on for 10 seconds

after fresh batteries are installed. It will

turn off automatically.

How do I know the fall sensor works?

Use the fall detection test procedure to

test the unit. Do not try to test the unit

by falling down on purpose. Serious

injury may occur.

I dropped the unit on the floor and it did

not alarm. Why not?

The unit experiences different forces

when you fall versus when the unit is
dropped. It is programmed to ignore the

types of shocks produced by dropping

the unit on a counter or floor to reduce

false alarms. The unit may alarm when

dropped, depending on the forces

experienced.