First International Computer Inc AQUAPAD02 User Manual
Getting Started
7
Powering Up
AQUAPAD+ features a two-way power supply that lets you use either the battery or
household AC current.
Using the Battery
The primary source of power for the AQUAPAD+ is the battery. The 2400mAH, 14.8V,
35.5 W, 4-cell Lithium battery combined with the Code Morphing Software technology
of the Crusoe processor provides up to 3 hours of battery life at full operation (with
Internet access).
The battery is accessible from the rear of the AQUAPAD+. Recharging is possible
using the AC-DC adapter supplied with the AQUAPAD+. It is not necessary to remove
the battery pack except to replace it with a fresh battery pack.
To remove the battery pack:
35.5 W, 4-cell Lithium battery combined with the Code Morphing Software technology
of the Crusoe processor provides up to 3 hours of battery life at full operation (with
Internet access).
The battery is accessible from the rear of the AQUAPAD+. Recharging is possible
using the AC-DC adapter supplied with the AQUAPAD+. It is not necessary to remove
the battery pack except to replace it with a fresh battery pack.
To remove the battery pack:
1. Turn off the AQUAPAD+.
2. Open the battery cover.
3. Slide the latch in the direction of the arrow shown in [Figure. 2.2].
4. Remove the discharged battery and replace with a new battery.
5. Replace the battery cover.
6. Turn on the AQUAPAD+.
Figure 2.2 Removing the battery pack
!
CAUTION
Battery charging requirement:
To lengthen battery life and maximize performance, we recommend you completely
charge then discharge the battery at least three times before commencing normal use.
To lengthen battery life and maximize performance, we recommend you completely
charge then discharge the battery at least three times before commencing normal use.