First International Computer Inc CW001-02 User Manual
M
ini-note User Guide
42
y For the power supply of this equipment, an approved power cord has to
be
be
used.
y Make sure the socket and any extension cord(s) you use can support
the total current load of all the connected devices.
y Before cleaning the Mini-note, make sure it is disconnected from any
external power supplies (i.e. AC adapter).
the total current load of all the connected devices.
y Before cleaning the Mini-note, make sure it is disconnected from any
external power supplies (i.e. AC adapter).
2.3 Starting Your Mini-note
The Power/Resume button is found on the left-top of the base unit. Press the
Power/Resume button to start your Mini-note and check that if the Power
LED turns on.
Power/Resume button to start your Mini-note and check that if the Power
LED turns on.
After a few seconds, the Mini-note’s display will turn on and your Mini-note
will begin to execute the Power On Self Test or POST to check if all system
components are running properly. Any error found during the test will be
displayed on the screen and may generate short beep sound as well.
will begin to execute the Power On Self Test or POST to check if all system
components are running properly. Any error found during the test will be
displayed on the screen and may generate short beep sound as well.