First International Computer Inc LM7WG User Manual

39 

 

After the test, the screen will also display a message "press <F2> to enter 
SETUP". You don’t need to run this program at the moment as your dealer 
already made the necessary settings for your computer optimal operation. 
Refer to Chapter 6 on running the SETUP program later. 

After the test has completed, your computer will start to search and boot up 
the operating system from your hard drive. The notebook computer normally 
comes with a Windows operating system pre-installed in your hard drive. 
Consult the Windows manual on how to use the program. If not, contact your 
dealer for assistance. 

2.4  Adjusting the Display Controls 

The LCD brightness adjustment is controlled by <Fn> +<F8> and <Fn> + 
<F9> 

keys respectively. You need to press these hot-key controls after 

powering on your notebook to suit your viewing pleasure.  

The Brightness hot-key control adjusts the brightness on the LCD. The 
brightness hot-key control will not set the LCD completely dark or bright; it 
provides sufficient lighting to the LCD to match the external lighting of the 
surrounding. The brighter the room, the more you need to increase the 
brightness of the LCD. 

2.5  Installing the Notebook Device 

Drivers   

If you already have an operating system installed into your notebook 
computer, it is best to install the needed device drivers for using the built-in 
devices of your computer. Before installing the drivers, check with your dealer