VTech Telecommunications Ltd 80-0048-00 User Manual
50
Cordless Headset
Deregistering a cordless headset
You must deregister a cordless headset from its original deskset before you can
You must deregister a cordless headset from its original deskset before you can
register it to a different deskset.
To deregister a cordless headset:
1. When the phone to which the headset is registered is idle, press
1. When the phone to which the headset is registered is idle, press
Menu.
2. Press q to highlight
User Settings, and then press SELECT.
3. Press q to highlight
DECT Headset, and then press SELECT.
The DECT headset menu appears.
4. Press q to highlight
Deregister, and then press
Select
.
The deskset screen displays
DECT headset is deregistered. The cordless
headset ON/OFF light flashes twice every five seconds to indicate it is not
registered.
The DECT headset menu appears.
Deregistering the cordless headset without the deskset
Cordless headsets can also be deregistered using the headset. You can use
Cordless headsets can also be deregistered using the headset. You can use
this method when you cannot use the deskset for standard deregistration. The
deskset may be out of range or may have been removed from the system.
To deregister a VSP505 headset, on the headset, press
To deregister a VSP505 headset, on the headset, press
vol
+,
power
,
vol
–,
power
,
vol
+,
vol
–,
power
.
Cordless accessory registration and deregistration time-out
If the cordless device is registered to another deskset or telephone, it must be
If the cordless device is registered to another deskset or telephone, it must be
deregistered first. See “Deregistering a cordless headset”.
For security reasons, the registration process on both the deskset and the
For security reasons, the registration process on both the deskset and the
cordless accessory terminates after the time-out period of two minutes if
registration is not successful.
If the registration process times out on the cordless accessory, the cordless
If the registration process times out on the cordless accessory, the cordless
accessory resets itself. If the registration process times out on the deskset, it
displays
Registration Failed and returns to Idle mode.
If cordless headset registration fails, the ON/OFF light on the headset flashes
twice every five seconds. To reset the headset, lift the headset out of its charging
base, place it back in the charger, and try the registration process again.