VTech Telecommunications Ltd 80-7009-00 User Manual
35
Telephone operation
Intercom
You may use the intercom feature for conversation between telephone base
and any system handset.
and any system handset.
At the telephone base:
Press the MENU softkey when the telephone base is not in use.
Press -/CID or +/DIR to select >Intercom.
Press -/CID or +/DIR to select >Intercom.
If you have a one-handset system, the telephone
base screen shows CALLING HANDSET.
If you have more than one handset, the telephone
base screen shows INTERCOM TO: . Press -/CID
or +/DIR to select your desired handset number and then press the OK
softkey. The screen shows CALLING HANDSET X.
base screen shows CALLING HANDSET.
If you have more than one handset, the telephone
base screen shows INTERCOM TO: . Press -/CID
or +/DIR to select your desired handset number and then press the OK
softkey. The screen shows CALLING HANDSET X.
The desired handset rings and its screen shows BASE IS CALLING.
To answer the intercom call on the desired handset, press 1 LINE/
FLASH
,
2 LINE/
FLASH
,
, INT, or any dialing keys (0-9, #, *). Both telephone base
and the handset now show INTERCOM.
To end an intercom call, press CANCEL.
To end an intercom call, press CANCEL.
From the handset:
Press INT on your handset when not in use.
If you have a one-handset system, your screen shows
CALLING BASE.
If you have more than one handset, your screen shows
INTERCOM TO:. Press or to select BASE or
HANDSET X and then press the OK softkey. The screen
shows CALLING BASE or CALLING HANDSET X.
CALLING BASE.
If you have more than one handset, your screen shows
INTERCOM TO:. Press or to select BASE or
HANDSET X and then press the OK softkey. The screen
shows CALLING BASE or CALLING HANDSET X.
The telephone base or other handset rings and its screen shows either
HANDSET IS CALLING or HANDSET X IS CALLING.
To answer the intercom call, press LINE 1, LINE 2, or any dialing keys
(0-9, #, *) on the telephone base or press 1 LINE/
HANDSET IS CALLING or HANDSET X IS CALLING.
To answer the intercom call, press LINE 1, LINE 2, or any dialing keys
(0-9, #, *) on the telephone base or press 1 LINE/
FLASH
, 2 LINE/
FLASH
,
, INT, or any dialing keys (0-9, #, *) on the handset. Both telephone
base and the handset or both handsets now show INTERCOM.
To end an intercom call, press INT, OFF, or place the handset back in the
telephone base or charger.
To end an intercom call, press INT, OFF, or place the handset back in the
telephone base or charger.
1.
2.
2.
•
•
3.
4.
1.
•
•
2.
3.
You can cancel the intercom call before it is answered by pressing OFF/
CLEAR
or
INT on your originating handset.
If the other handset does not answer the intercom call within 100 seconds, is in
the directory or call log, or is out of range, your originating handset screen shows
UNABLE TO CALL TRY AGAIN and returns to idle mode.
UNABLE TO CALL TRY AGAIN and returns to idle mode.
Press OFF/
CLEAR
or MUTE/
REMOVE
on the other handset to temporarily silence the
intercom ringer.
You can use a maximum of four handsets at a time. When two handsets are used on
an intercom call, use two other system handsets for an outside call.
•
•
•
•
INTERCOM TO:
Handset 1
Handset 2
Handset 2
OK
INTERCOM TO:
Base
Handset 2
Handset 3
Handset 2
Handset 3
BACK
OK
36
Telephone operation
Answer an incoming call during an intercom call
If you receive an incoming outside call during an intercom call, there will be
an alert tone.
At the telephone base:
an alert tone.
At the telephone base:
To answer the call, press LINE 1 or LINE 2 . The intercom call ends
automatically.
To end the intercom call without answering the incoming call, press the
CANCEL softkey.
automatically.
To end the intercom call without answering the incoming call, press the
CANCEL softkey.
From the handset:
To answer the call, press 1 LINE/
FLASH
, 2 LINE/
FLASH
, or
. The intercom
call ends automatically.
To end the intercom call without answering the incoming call, press OFF.
To end the intercom call without answering the incoming call, press OFF.
•
•
•
•