DEI Headquarters Inc. DEI7352 User Manual
39
© 2011 Directed Electronics. All rights reserved.
Owner recognition
Owner Recognition is a revolutionary feature avail able only from Di-
rected. Using a Directed Bitwriter
rected. Using a Directed Bitwriter
®
, hand-held programming tool, your
dealer can program many of the system settings. The programmer
makes it possible to program different settings for each trans mit ter that
is used with the system. Then, when ev er a specifc transmitter is used,
the system will recall the settings assigned to that transmitter. Owner
Rec og ni tion lets up to four users of the system have different settings that
meet their specifc needs. It is almost like having four separate alarms in
your vehicle, one for each user.
Note: Owner Recognition cannot be programmed without a Bitwriter
makes it possible to program different settings for each trans mit ter that
is used with the system. Then, when ev er a specifc transmitter is used,
the system will recall the settings assigned to that transmitter. Owner
Rec og ni tion lets up to four users of the system have different settings that
meet their specifc needs. It is almost like having four separate alarms in
your vehicle, one for each user.
Note: Owner Recognition cannot be programmed without a Bitwriter
®
and the necessary soft ware. Check with your dealer for more informa-
tion.
tion.
Rapid resume logic
This Directed system will store its current state to non-volatile memory. If
power is lost and then reconnected the system will recall the stored state
from memory. This means if the unit is in Valet Mode and the battery is
dis con nect ed for any reason, such as servicing the car, when the bat-
tery is re con nect ed the unit will still be in Valet Mode. This applies to all
states of the system including arm, disarm, and Valet Mode.
power is lost and then reconnected the system will recall the stored state
from memory. This means if the unit is in Valet Mode and the battery is
dis con nect ed for any reason, such as servicing the car, when the bat-
tery is re con nect ed the unit will still be in Valet Mode. This applies to all
states of the system including arm, disarm, and Valet Mode.