B+B SmartWorx THINQ1 User Manual
Quatech SDS User’s Manual
Configuring the SDS using a Web interface
Figure 68 - Firmware Upgrade screen
Note: Only SDS devices with a
firmware revision level of 5.0
and above can support SNMP.
Determine the revision level of
firmware revision level of 5.0
and above can support SNMP.
Determine the revision level of
an SDS (check the bottom of
the Home page in the Web-based
the Home page in the Web-based
interface) before upgrading the
firmware.
firmware.
Step
Procedure
Description
Step 1
Browse to the location with the revised
firmware file.
firmware file.
Most of Quatech’s device drivers are
available from our Web site.
available from our Web site.
Step 2
Press Send File.
The Remote Reset screen displays.
Figure 69 - Remote Reset
Step
Procedure
Description
Step 3
Press Reset to reset your SDS.
The SDS must be reset to implement the
new firmware.
Contacting Quatech
Step
Procedure
Description
Step 1
From the Home screen, select Contact Us. The Contact Us screen displays.
Figure 70 - Contact Us screen
March 2005
940-0183-151
Page 75