Digital Security Controls Ltd. 005132 User Manual

11

7. Go to the next device to be tested and activate it until the test result is

displayed/sounded.

NOTE: Wait until the placement test of one device is shown/sounded before
beginning to test the next device.

Continue to test the devices until both the PC5132 and the devices are in
good locations. If several wireless devices produce BAD test results, you
may need to move the PC5132 to a better location. (See section 2.2 for
tips on finding a location for the PC5132.)

8. To exit the placement test and return to installer programming, press [#]

twice.

Testing Individual WLS904NB433 and WLS907NB433 Devices:
1. Temporarily place the WLS904NB433 or WLS907NB433 you want to test

in the place you want to mount it.

2. At a system keypad, enter [✱][8][Installer Code].
3. Enter programming section [904].
4

Enter the 2-digit zone number for the device to be tested.

5. Activate the device being tested until a result is displayed on the keypad

or sounded by the keypad or bell. (Same as step 5 in the Global
Placement Test section, previous page.)

6. To test another device, press [#] once, then repeat steps 4 - 5. Continue

to test the devices until both the PC5132 and the devices are in good
locations.
If several wireless devices produce BAD test results, you may need to
move the PC5132 to a better location. (See section 2.2 for tips on finding
a location for the PC5132.)

7. To exit the placement test and installer programming, press [#] twice.

Testing Individual Wireless Keys:
You cannot use the individual device test described above to test WLS909NB433
wireless keys. To ensure that the PC5132 receiver is receiving transmissions
from the devices, use the function keys on the WLS909NB433 at several
different points in the installation.

When you have tested reception of the PC5132 with all the wireless devices (see
section 5.1) and you have a good mounting location, mount the PC5132:

1. Pull the Keybus wires through the hole at the bottom of the cabinet.
2. Mount the cabinet securely to the wall.

Mount the Devices
If you have conducted the placement test described in section 5.1 and got 3
“Good” or “Fair” results in a row for each device, you can mount the wireless
devices. See the Installation sheet for each device for mounting instructions.

Now that your PC5132 and wireless devices are mounted and working properly,
read section 6 for information on potential wireless trouble conditions, RF
jamming signals, and battery replacement.